edowns's latest activity
-
Eedowns replied to the thread Bseries valve clearances.Hi Dont suggest s using the fan as it is relatively weak. I jacked up one back wheel [the other has to be firm on the ground to stop...
-
Eedowns replied to the thread Bseries valve clearances.Thanks all. Job done using EOIC [I think]. When one valve is fully open adjust the cylinder's other valve. Well it works, and is...
-
Eedowns replied to the thread Bseries valve clearances.Thanks all. I'll give it ago this week and report back. As regards turning the engine over, that's the next trcky bit as I cant' [yet]...
-
EIn case this question was directed at me... Only (in my case) because the recommended period is something like 600 hours, and my...
-
ECat engines have a little chart in their manuals for what valves to set on a rotation. Only have to spin the engine over once after your...
-
EAdjusting valves on these isn't hard by anymeans. Guess I use a bit different version of the eoic thing. Spin the engine over and watch...
-
EIn nearly all 4 cycle engines since the beginning of their invention, valves are adjusted while the cam follower is on the base circle...
-
EForget the timing cover or marks on the flywheel, it's a waste of time. Pull the valve cover, not which vales are intake and which...
-
Eyep eoic method. Hasn't failed me yet. That's not eieio by the way :D EOIC-exhaust opens, intake closes---meaning when the exhaust...
-
EA set of stepped feeler gauge(Go-No gauges) make valve adjustment much easier. Look them up. Good Luck!
-
EI need to check the valve clearances in my tractors. Are you saying doing it the way you described can be done without removing the...
-
EI have a B1600 tractor and a Work Shop Manual for B1710 to B2710. Not ideal but the best I have managed so far. I want to check and...
