Recent content by dwa

Put a little more hyd fluid in, put pressure line back on, started it up and hydraulics worked immediately. Thanks for the responses and input.

Yes, there is a loader, 3pt and rear remotes. I have not started to see if they worked since priming the pump. Prior to priming, nothing worked and I moved the controls quite a bit to try to get any air out. It just wasn't pumping any oil.

Would the white grease not mess up the new hydraulic oil?

I have a 1996 Kubota M7030SUDT that I changed the hydraulic fluid and filter on recently. Hydraulics were working, a bit slow, before the change but not at all after. I did not fill the new filter before installing but when the hydraulics didn’t work, I took it off, filled it and...

I have a 1996 Kubota M7030SUDT with low profile wheels and tires (R 18.4x16.1 & F 9.5x16). I need to change to larger wheels/tires for haying. I am looking for Kubota rims with 8on8 bolt pattern and 6 in centers. I am looking for used rims, either rims alone or with the following tire/wheel...

I'm looking for good Kubota wheels for my M7030SUDT tractor. Rear size needed is 15x30 to fit 18.4x30 tires. Front size needed is 10x24 to fit 11.2x24 tires. Need complete set, two front and two rear. All must be 8 on 8 bolt pattern with 8 inch centers. Thanks

I am trying to find a used ROPS for my 1996 M7030SUDT. If anyone has one, I'd be interested in it. Also, can anyone tell me if a ROPS for an M6800 will fit the M7030?

I have a M7030 SUDT Kubota. Yesterday I was using a side discharge 3pt, pto driven rake when all of the sudden, the 3pt would not lift the rake. After quite a bit of effort and the help of a high lift jack, I was able to disconnect the rake from the tractor, but the lift arms still wouldn’t...

Pull them from the valve or the control head? If from the valve, do I need to drain hyd fluid first so it doesn't go everywhere? Do you have any instructions or suggestions that I can read? As I said, i've never dealt with this before. Tried to find breakdown of valve and instructions but...

I have a ’96 Kubota M7030SUDT with a Kubota M1250 Loader. Loader works but when control is released, the loader continues to rise until I consciously move the control handle forward. It has been that way for a long time. Now, the same thing is happening when I lower the loader, I have to...

I have M7030SUDT with low profile wheels and tires (F 9.5-16, R 18.4-16.1). Want to change to regular wheels/tires. Looking for 15x30 rear wheels with 8on8 bolts and 6 inch centers (Kubota) and 10x24 front wheels, also 8on8 with 6 inch centers (Kubota). OR wheel/tire combo of: 18.4x30 R-1...

Wolfman, thanks for the information. I've been researching and am now trying to determine whether one piece wheels or two piece wheels are best. As stated above, the fronts will be 10x24 for front wheels and 15/16x30 wheels. My current wheels are one piece, but what I am finding are two...

Thanks Wolfman. Unfortunately, they are the ones that have the tires/wheels I said I had found, but have not answered my e-mail for over a week now. Not sure how much help they will be. So, to clarify, if bolt count, center to center of bolt measurement and center measurement is the same...

I bought an M7030SUDT Kubota a few years back that came with 9.5-16 front and 18.4-16.1 rear tires. I need to change to 9.5-24 and 16.9-30 tires (or 11.2-24 and 18.4.30 tires). With this change I also need new wheels. I want to purchase used wheels if possible, but can find no information of...