Recent content by Drmaz

I have done a quick search in the forum but could find an Answere to my question. I have a B7000 and was just wondering how much transmission oil these little beasts normally take it dose have a hydraulic point linkage on the back don't know if that makes any difference or not any help will be...

Thanks to everyone who gave me help on this one. I flushed the radiator out and refilled the coolant. I also blow out all the crap from the fins ( there was a lot of dirt and grass stuck in it) and I also invested in a new rad cap. Seems to have done the trick as I mowed tall grass for about one...

Hi have another problem with my B7000 (circa late 70's) the hydrolics at the rear ( I have the slasher mower attached ATM) are very slow to react. When I push up on the lever the mower deck raises very slowly. I thought it might be low on hydrolic fluid, but I couldn't find any dip stick to...

Hi guys thanks for the tips I'll do some work and let you know how I get on. Do you know where I might be able to buy one of those whistle from. Thanks for your help Cheers Stan

Hi I have just brought a B7000 circa 1979. I was using a rear slasher (mower) and after about 10 mins of mowing I noticed some steam coming coming out near the front RH wheel:confused:. After further inspection I found the it was coming from The over flow hose from the radiator but this hose...