Driver57's latest activity
-
DDriver57 replied to the thread B7200HST hydraulic issue.I now understand. Thank you Hokie.
-
DDriver57 replied to the thread B7200HST hydraulic issue.What would be the difference between the old control valve and the Prince valve I have now? I thought all hydraulic systems needed a...
-
DDriver57 replied to the thread B7200HST hydraulic issue.Thanks Dan and everyone else for the input. Will order the plug.
-
DDriver57 replied to the thread B7200HST hydraulic issue.I’ve looked everywhere I know for new or used Kubota valves. Also it’s a Woods loader. Any recommendations for a better quality valve...
-
DDriver57 replied to the thread B7200HST hydraulic issue.The original valve was not repairable due to where the it failed. I’m pretty sure I threw it away as there Was no reason to keep it.
-
DDriver57 replied to the thread B7200HST hydraulic issue.There are four lines coming off the loader valve. Two coming in from the hydraulic pump. I will try putting the three point at max...
-
DDriver57 replied to the thread B7200HST hydraulic issue.So what you’re saying is I’ve been victimized by my own frugality. Fair enough. Will look into purchasing a Kubota valve. Just didn’t...
-
DTwo part question. I have an ‘84 B7200HST. First part- I have around 450 of ballast on the 3 point. When I set the 3 point about a...
-
