Recent content by drcdac

Does anyone know the fuel line size so I can put a shut off valve inline? Kubota put the filter in a bad position and I keep scraping it with tree branches while clearing a lot. Then not only do I loose the filter bowel but 10 gallons of diesel. Thanks

Just picked up my L3200HST If anyone finds a discount service manual please let us know

Just took delivery on a new 2013 L3200 HST 4X4 FEL Very nice tractor. It replaced a L4600HST that was sold with the house. New place is too tight for bigger L4600 and that was decision to go with L3200. I have 5 hrs on it mostly moving rock and prepping pad for barn. NO issue with 3 point...

I purchased a L4610 HST 4 wheel drive with 189 hrs on it 6 months ago for $13500 plus $1200 for a 6' shredder. It also had been left out side all it's life. I had to polish paint but no rust ! All 4 loader cylinders had to have seals. $24 each and a little work on my part. Good luck with your...

I have a L4610HST and run a 6' brush Hog and 2100 works really good for me. Cuts good and even in heavy brush RPM only drop off a bit and come right back up.

The position control lever for 3 point hitch is real sticky on my (New) 2001 L4610hst. Tractor has been sitting in the open all its life and most of the rubber parts are bad. Lever is real jerky as you move it making fine adjustment impossible.

Thanks I have a new 6' Priefert shredder. Just finished 15 acres and it didn't make any difference cut left or right. Thanks for reply

New Kubota L4610 HST owner with a 6' brush hog. Neighbor says there is a "right" way to brush hog. What is correct direction of travel? Thanks:)