Recent content by DonP

Then the higher the cSt rating, based on what specific parts, or combination of parts are being lubricated, the more protective the higher rate oil may be for lubrication purposes?

Awesome feedback!!! Having changed the UdT fluid in my 3560 twice now, both in the trans and the front end, I'm surprised to find out that it's the same weight as what regular 80wt oil is. Amazing.

Im having this same issue now... just out of warranty. In the past I did have the issue with the 3 point being up too high and impacting the relief valve. It's definitely not that... I am watching that. In reverse I get 7.6 mph in medium range and rabbit, in forward I get 4.1

I have wondered if the materials (Bearings and locations) are more suited and or designed to be to that of the UDT weight over the heavier 80w?

Bought a 3560 HSTC Cab 805 loader with BH92 Backhoe and 72" LandPride Grapple After the dealer (White's in Canastota NY) Boogered it up during warranty service, i thought about trading it for a 4060 (8" or so longer base and a bit taller but with a 4 cyl engine vs a 3 cyl...) decided to stick...

very nice machine!!!

Out of nowhere my 3560 HSTC, after an Oil change (all oils) and a trip to the dealership for a new seat, and a regen... it now has limited forward speed.... Reverse seems to be fine. I can go forward at 4.2 mph maximum in medium gear, and reverse at 7.6. (typical is about 8-9 in medium gear...

Beautiful story!!!

You are right in the middle as far as what you are anticipating you will need in the future and your property size/limitations now. I wondered a lot if I was going too big from the 4701 to the L3560. Even today I look at the tracks I make and then limit my use in wet weather if possible. There...

I was shocked ... L3560, 14 months old. 400 hours and first change of the hydraulic and front axle oil. The 3 containers are old Pepsi plastic containers so there is no difference in the clarity of the plastic. I backlit top down above the containers with a sheet of white paper behind the...