Devon Cruiser's latest activity
-
Devon Cruiser replied to the thread B6200D / KBF200 FEL Project.Amazingly the new brake shoes arrived in UK in 3 days from Traktor Parts in Poland. Good quality but the springs were a bit slack so I... -
-
Devon Cruiser replied to the thread B6200D / KBF200 FEL Project.All lighting connections re terminated. Fuses and fuse holders replaced and nearly all the electrics sprung to life. Now outstanding is...
-
-
Devon Cruiser replied to the thread B6200D / KBF200 FEL Project.Starting to explore the electrical system. I decided that getting the lights working would be a good step forward. But of course there...
-
-
Devon Cruiser reacted to Paul Allwood's post in the thread Front left hub is a bit sad - advice needed with
Like.
Many years ago I fitted coil springs from the front of a Range Rover to the back of a 60 series LandCruiser. I made brackets to fit them... -
I probably would have just ran a quick bead of weld down the washer stack (after adding additional washers if needed) and went and...
-
A new acquisition and my first tractor. There is a ton of work to get her baselined and reliable. thought I would document the activity...
-
Welcome Devon Cruiser, I'm over the water in south Wales.
-
Devon Cruiser reacted to Runs With Scissors's post in the thread New Member & New Acquisition with Like.
I agree….those "paint chips" don’t taste like they used too……I miss the “good ole days" ;)
-
Devon Cruiser replied to the thread New Member & New Acquisition.Ah yes thanks for pointing that out. I will not be heating that up too much then 🙄
-
There is some o-ring seal on the rod into the tractor case???
-
Devon Cruiser reacted to TheOldHokie's post in the thread Which Transmission / Hydraulic Oil for an old B6200D Manual Transmission? with Like.
SUDT2 is a lhinner oil and is the prefered fill in the US. Its main advantage is better cold weather flow and improved water tolerance...
-
Devon Cruiser replied to the thread Which Transmission / Hydraulic Oil for an old B6200D Manual Transmission?.Thanks very much Dan. so would Super UDT 2 also be ok or is that a thinner viscosity or something?
-
Devon Cruiser posted the thread Which Transmission / Hydraulic Oil for an old B6200D Manual Transmission? in Service, Repair & Maintenance.The oil is due to be changed. The PO used UDT which is hard to get here. Is Super UDT an acceptable substitute please?
-
Devon Cruiser replied to the thread What did you do to or on your Kubota today?.Replaced the twelve zirk fittings (grease nipples) on my KBF200 FEL today. No dramas. One blocked but cleaned out ok. These were all...
-
Devon Cruiser replied to the thread New Member & New Acquisition.Indeed it is beautiful and hilly @12251hd. Glad you have seen it and regard it so. Thankfully our little bit is a relatively flat plot...
