Derf's latest activity
-
DDerf replied to the thread Help with a L4630 WSM issue (and tractor stalling issue).It did finally die from fuel starvation today, so I turned the fuel cock back on. Took a few tries to get it started after that, but...
-
DDerf reacted to North Idaho Wolfman's post in the thread Help with a L4630 WSM issue (and tractor stalling issue) with
Like.
The fuel shut off is not instantaneous, the fuel injection pump holds quite a bit of reserve fuel. I can run mine for quite some time... -
DDerf replied to the thread Help with a L4630 WSM issue (and tractor stalling issue).After not having time to work on this for a few days, I went out to try your troubleshooting steps this evening, but a couple of things...
-
DDerf reacted to Russell King's post in the thread Help with a L4630 WSM issue (and tractor stalling issue) with Like.
@North Idaho Wolfman Is there any possibility that the air vent being open (even if you think it is closed) could cause the issue? I...
-
DDerf reacted to North Idaho Wolfman's post in the thread Help with a L4630 WSM issue (and tractor stalling issue) with Like.
It can, but usually you'll only notice it when the the lift pump is bad, as it normally will move more diesel than the tractor uses...
-
DDerf reacted to whitetiger's post in the thread Help with a L4630 WSM issue (and tractor stalling issue) with Like.
Also, see if the hose barb fittings are tight in the filter head. If they become loose, you will suck air around them.
-
DDerf replied to the thread Help with a L4630 WSM issue (and tractor stalling issue).That's what I was thinking, so I seem to be doing the right thing. What happens when I turn the fuel cock the opposite way from "A"...
-
DDerf reacted to North Idaho Wolfman's post in the thread Help with a L4630 WSM issue (and tractor stalling issue) with Like.
Sorry but your getting a little confused, the WSM can do that. The Fuel Cock on the filter housing flag should be sideways (A position)...
-
DDerf posted the thread Help with a L4630 WSM issue (and tractor stalling issue) in Service, Repair & Maintenance.My L4630 GST is a used one I bought from my neighbor a couple of years ago. It has been very reliable, but I decided to replace the fuel...
-
-
DDerf replied to the thread Flushing hydraulic fluid from implement.We got your dry winter here in Colorado. I barely used my snow plow at all. Fortunately we've had a decent number of wet days in the...
-
DDerf reacted to North Idaho Wolfman's post in the thread Engine quits with no warning sounds with Like.
It's senses seat with back side on it, or not, so that's two states. Third state overrides the first 2 when you tilt the seat forward.
-
DDerf replied to the thread Engine quits with no warning sounds.Ok, so a dual contact switch, to my mind, tells me that it makes one contact when sitting on the seat, and another contact when the seat...
-
DDerf reacted to North Idaho Wolfman's post in the thread Engine quits with no warning sounds with Like.
No, there is 2 switches internally, only only arm
-
DDerf replied to the thread Engine quits with no warning sounds.Does that mean I should see 2 plastic arms sticking out of it? I only see one.
-
DDerf replied to the thread Engine quits with no warning sounds.Update: I ran the chipper for over an hour and a half, keeping the seat forward, with no shut offs. I even tried bouncing the seat in...
