Recent content by Debaglio

  1. D

    zd28 starting issue

    Well, bought a new starter and it is amazing how much faster it turns over. Hopefully, that has fixed the problem.
  2. D

    zd28 starting issue

    Ok, well, tried to figure this out for a while. When i turn the key, get all lights and most times it starts. Occasionally, I just get clicks, sometimes I get nothing. I have figured out that if i cross the solenoid starter spins and them the mower starts right up. I had replaced the...
  3. D

    ZD28

    Thank you. I will try that
  4. D

    ZD28

    Thanks, I will check that when I get back to the mower next weekend.
  5. D

    ZD28

    Sorry for the delay in reporting back, was out of town for a bit. The saga continues. Today I was mowing, it started right up, and received a phone call and shut it off. After the call, I went to restart and the lights lit up, but nothing happened. I made sure I had all the levers in the...
  6. D

    ZD28

    Thanks so much for the detailed info. I will check those things in a few days. The mower and i are separated by some distance and I only get there to mow.
  7. D

    ZD28

    Multiple responses: I will check the cables when I get back to the mower in a a day or two. I do not believe there is an adjustment on the solenoid, but cannot say for certain. Thanks for the suggestions and ideas.
  8. D

    ZD28

    Battery was new in the spring. So don't think that is it. Thanks though
  9. D

    ZD28

    Thanks, certainly something to try.
  10. D

    ZD28

    I need a little advice. I have a ZD28 with slightly less than 1000 hours. Approximately a year ago when I would try to start it would click a few times and then start. I thought it was the starter selenoid and replaced it over the winter. So far this year it was good. The other day I went...
  11. D

    ZD28 starter solenoid

    Ok, thanks for the help
  12. D

    ZD28 starter solenoid

    Sorry to be a pain. Based on the drawing, then I gather I have to remove the starter to do this?
  13. D

    ZD28 starter solenoid

    Ok two things. First I have it wired exactly as you stated. STill does it. However, I found today something, that to be honest I am unsure of. I assume (and we know what happens when we do that) that the plunger for lack of other words, needs to be in the y shaped yoke in the starter...
  14. D

    ZD28 starter solenoid

    thanks, I will try that. Don't really understand what happened. It did not do it before, but just after I installed the new one and even when I re-installed the old one.
  15. D

    ZD28 starter solenoid

    Don't think so. In fact even tried reversing them and still the same result.