Recent content by Dconnell

Thanks man big help. I’ll check it out when I get back down there later this morning

Yes my three point works fine I may have something corrected incorrectly. there are only 3 hydraulic hoses. the fittings in the tractor has one hose coming off the side with a female fitting. Then it has a make and a female fitting. Does anyone have a diagram of what each hose goes to?

Just reattached my LA680. It’s been off for two years. Stored outside. I can curl the bucket up and down, but it won’t lift up or down. Could there be air in the line causing this issue. 3 pt goes up and down freely and the scoop/dump function seems to work fine. just can’t get the thing to...

Need a little help. I lost the pivot pin that connects my 3 point hit arm to the rear end housing I can seem to find one, guessing I’m calling it the wrong name pictures attache 1 showing the intact left side pin and the 2nd showing the missing right side pin

I would do this but the tractor is at my hunting club about 2 hours away. There isn’t any place close to buy a bolt, so I was hoping to get the size so I can just bring it with me next time I’m headed there

I lost a bolt on my front differential. the part number is 01176-51430 I went to order on but everyone wants $15 to ship a $2 bolt anyone know the size and grade of this bolt so I can just get one at the hardware store I looks at all the sites, but can’t find the bolt specs

Thanks Dan

Yes. Coleman’s shows discontinued as well

Looking for the mounting pins to mount my LA681 FEL to my 96 L3600 I can find the back pin 75548-57810 at Messicks, but high $32 each) The front pins show as 7J240-57490 or 7J240-57492 but show as out of stock anyone got some of these pins laying around that they want to part with?

I have a fairly new to me 1996 L3600 with a LA680 loader. This has the 4 point quick disconnect. This thing is really loud when I'm bush hogging. It rattles with every bump. Are there supposed to be any kind of bushing on the pins that hold the FEL on? Mine just has loose fitting pins that...

Anyone have an idea where I can get a rubber floor mat for my 1996 L3600? Searched the web and coming up empty for this model Thanks

Just bought my first Kubota. I will be leaving this tractor at my hunting club. My understanding is one key fits all. Is there an upgrade ignition that would provide a bit more security?