Recent content by dboblitt

Cleaned off the fins with compressed air from the engine side and gave a gentle wash with water as well. Did slightly better but after a 1/2 hour running it had climbed nearly to the red again. Took an IR thermometer and engine was reading 225F or so, radiator inlet and outlet both seemed to be...

Thanks, hadn't thought of the fan belt. Fan has all its blades and appears to spin fine while running but I should check the belt. I do have a IR thermometer, top of the radiator was at least 200F after running for 15 minutes or so, didn't check the engine itself but may give that a try next.

120 hours so it has only be flushed the once. That was done by a dealer after some rodent damage so not sure of the coolant type. Ambient was only 60 F when it started.

Trying to figure out where to start with trouble shooting but I have an overheating problem on my BX2370. Coolant levels are good (but has not been flushed in a couple years) and I have tried cleaning the radiator and mesh screen with compressed air. After 10-15 minutes of running the temp keeps...