Recent content by dbarefoot

Thanks for the complement. This auger sure beats digging by hand. Took me longer attaching it to the BX than to dig the 6 post holes...about 10 mins total to dig the holes. If you are planning a fence with a lot of post, definitely get yourself one.

These are 6x6 post. I bought a 9" auger for the hole digger. Probably going to order a 12" auger as well. This is a full size 48" long auger and the BX23S has no problem at all with it. Put the wall together today and started back filling...

Dropped the BH again to mount my 3PT and new auger today. Then tried it out to set some post to finish off a retaining wall...

Already put the Bxpanded skid plate on mine.. Did you paint your tooth bar?

I dropped the BH off to access the pressure relief. It just makes it easier to get to it with a socket and extension. I almost rolled my BX the first night I was using it to back fill a retaining wall I built behind my swimming pool. I hit soft spot of ground and the front right wheel sank in...

Dropped the BH off to access the ROPS wiring and mounted some LED's to the ROPS. Also, got around to taking a photo of the Bxpanded under armour I put on a week ago...

3" wheel spacers for stability.

Bxpanded Piranha Tooth Bar...

I've been working on putting in an above ground pool since this summer. Had to clear densely wooded hill side behind my home. Remove trees and stumps. Add and level the ground and build some retaining walls. I've been renting BX's and Mini Ex's for this, and finally broke down and just went and...

And shimmed relief for higher hydraulic pressure.

I've also added 3" wheel spacers.

I'll work on that now...#2

Gave my BX some teeth today...