Recent content by DansB21

Ordered - thanks again! Dan

Hey All, So I got a Kubota block heater kit which glues into the freeze plug location. As noted by Wolfman, the opening behind it is pretty restricted so I pulled another plug near the starter and it was exactly the same. I decided to add the threaded insert for the block heater in the...

Hey Wolfman, Thank you for the links and diagrams - you rock! Didn't think the freeze-out plug location was a place that Kubota would use. Yes, there are a couple accessible on both sides of the block. I will order the parts and change it out. 16 degrees out this morning and it started -...

Hi All, Looking to add a block heater to my 2011 L45 as we will see single digit temps in the next week or so. I have looked all over the internet for the port location for adding one and cannot for the life of me find it. Most notes say under or near the fuel pump on the right (passenger)...

Hey All, So I have been working at this issue nd it continues to be stuck. I have sprayed it several times over a few weeks with super penetrating oil as well as tap with a hammer several times in the hopes it would pop. I have tried releasing the stabilizers and applying pressure with the...

And attached are a couple pics of the B21 latch for the Bh

Thanks for the replies all. Watched the video - not sure if the latch is the same but it has not come loose as of yet. I called Powerco in NJ and asked the service department about it. They said the older latch style systems that the B21 has have been eliminated due to them seizing up. Then...

Hi all, I have owned my B21 for 7 years I have the operators manual for the machine but not the BT751 backhoe. I am trying to figure out how to remove the backhoe and am a little stumped. There are levers on the top with spring-loaded pins that appear to be a release of the top hooks if I am...

Awesome guys - thanks. There is a pin for the up and down of the back hoe portion, but I did not see one for left / right. Was thinking that once the coupler was disconnected, the hydraulic pressure would be released and the back hoe and stabilizers would just fall to gravity. I am very...

Hi All, New to the forum but familiar to forums for my cars. I bought a used Kubota B21 last summer after I moved to PA and the machine is awesome. I have two issues with it that I need advice on: First question: Block heater - way too cold this week and the tractor did not start needless to...