Recent content by danells

The service guy at Kubota said simpy remove the PB line from the Loader control valve and connect it to the input side of the new valve. Then run a jumper from the outflow of the new valve back to the PB port on the old valve. Sounds simple enough??

Awesome thank you for taking the time to explain to a newbie!!!!!! Have a great Holiday !!! Dan

Agree - how can you tell if a valve is going to work??

Ordered one of these: https://www.amazon.com/gp/product/B09D7X23C9/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1 Spoke with Kubota - they said to move the PB (green) line from the old COntrol block to the new then a short host back to the control block from the new block outflow Will this...

so w So what are my options??

this seems to be the issue - the flow back to the control valve

THANKS Ok - so here is what i have going on now. When I hook the single cyl plow to the connections that WERE used by the tilt cyls - the plow angles in one direction - not the other. If I sway the 2 lines on the control valve - the plow angles the other direction. It seems like the flow BACK...

I have an LA525 Loader and am adding a quick disco snow plow. The plow has 2 single action cylinders. Can I plug the Hydraulic lines from the plow into the hydraulic control block connectors used for the bucket cylinders (dual action)??