Recent content by Dana

It was the linkage on the side of the transmission from the clutch pedal that limits the forks on the throwout bearing.

I took advantage of this nice fall sat and worked on my tactor, I found that it was a linkage adjustment that had to be made. Not as big of a problem as i thought. Thanks to everyone who helped!

I have just go my b7200 hydro, back togeather after replacing the head, clutch, preasure plate, throw out bearing and machining for pilot bearing. The good news is the motor runs great, but the clutch does not seem to be working. I was hoping that someone would point me in the right direction...

Thanks everybody these are all great leeds!!

I am finally getting my B7200 back togeather after replacing the head and Clutch, I have decided to replace the motor mount bolts due to excessive wear. They seem to be m10 1.25 60mm and m10 1.25 35mm. I have only found one place that has them but they want approx $5.00 a bolt for them....16 x...

still looking! any leeds????

I'm Intrested do you have any idea of shipping to Sydenham Ontario Canada

Intrested in clutch and presure pllate for b7200 also looking for gasket set for above? Thnaks Dana

The quote was $590 plus shipping both ways.. seems a little high to me!

Thanks Sent email for quote Has anybody used the company?

How succesful is this?

Looking for a head for my B7200 any economical ideas?

My father and I have been looking for loader for his b7200 when we found a whole b7200 with a loader and mid deck mower for about the same price as we were wiling to pay for a loader. But.... it did have some problems.... after working it for about a year i decided to tear it down and replace...

My father and I have been looking for loader for his b7200 when we found a whole b7200 with a loader and mid deck mower for about the same price as we were wiling to pay for a loader. But.... it did have some problems.... after working for about a year i decided to tear it down and replace the...

Thanks you help is greatly appreciated!!!!! Still waiting for a reply from the ad! will let you know!