Recent content by dabadas

  1. D

    steering issue B26

    blown center steering seal that fixed it thanks
  2. D

    steering issue B26

    thanks ill try that
  3. D

    steering issue B26

    anyone have trouble with the steering on their B26 ? I was using it and and the steering starting acting up I had to start turning the very fast just to get the tires to turn fluid is full front bucket worked fine
  4. D

    hydraulics nothing works

    ok sorry I've been away for a while. So I replaced the hydraulic pump and that fixed my problem with it losing its prime when sitting overnight. So far so good.
  5. D

    hydraulics nothing works

    yes I changed both filters. I guess the pump is next. Is there a bypass in the filter bracket? It's posiable that it could be hung open. Thanks
  6. D

    hydraulics nothing works

    OK I have taken the the suction tube off and inspected it. I also replaced the o-ring and the rubber elbow with new hose clamps. I also removed the hyd. pump and disassembled it. Inspected every thing inside and put it back together. Bleed the air off it worked great. Lots of power. parked it...
  7. D

    cutting edge for b26

    I got me a piece of flat stock. So I'm going to make my own.
  8. D

    hydraulics nothing works

    I have the repair manual. I took the rubber elbow off on the suction line and it appears to be ok (I ordered one anyway). So I put it back on and loosen the line at the cylinders to bleed off any air i could find. Took it out last night and used it everything worked fine. Come home from work...
  9. D

    hydraulics nothing works

    Checked the suction line, everything looks fine. On the rubber hose section the clamps seemed a little loose, so I tightened them a bit. I noticed when i get the front loader and backhoe to start working they seem slow. Also they are working at idle. But, when i increase the throttle they stop...
  10. D

    hydraulics nothing works

    OK here I go again. I've changed the hydraulic fluid and filters. When i started it up it had air in it. Got the air out drove it around a while and seemed to be fine. so after sitting in my climate controlled shop for a few days I start it up and and it has air in it just from sitting. The...
  11. D

    hydraulics nothing works

    its the same one kenmac
  12. D

    hydraulics nothing works

    It was on the Birmingham craigslist
  13. D

    cutting edge for b26

    who has the cheapest cutting edge for the front bucket on a b26? it measures about 59 1/2 inches long and about 7 3/8 between bolt holes, cheapest i seen was $315 ouch thanks
  14. D

    hydraulics nothing works

    thanks to everyone for the help
  15. D

    hydraulics nothing works

    Turning the steering all the way right and left purges the system. I added a little less than 3 quarts to it just to make sure it was full. (May have been a little over full) it foamed up and ran out the fill hole. Going to get new filters and oil and change it. I guess bouncing on the trailer...