Recent content by cwheatsr

I do idle down before disengaging and also depress the main clutch before engaging so I can control starting the PTO spinning with the main clutch so there is no shock load. Have done that since it was new. When I do disengage at idle the finish mower is spinning slow and 15 or 20 seconds later...

Hello all, Last several times I cut grass with a rear grooming mower the pto took 15 or 20 seconds to stop spinning the mower when I pushed the switch to cut it off. It has not failed to desengage but just takes too long. It should be instantly when the switch is pushed. Wondering if anyone...

working for me now. thanks

The site is not letting me read this post or any post

I am getting messages that an account upgrade is required to view the posts.

Try putting a bar of plain green Irish Spring hand soap in the places you want to keep mice out of. Evidently the smell is something they do not like. I read about it some place else and tried it and it seems to work for me. I have put some in all my vehicles, tractors, UTV's, etc. and even put...

Thanks for the response North Idaho Wolfman, I thought the same thing when the sales man told me about the fitting being moved caused the problem. I have bled air from numerous systems by cracking the line at the pump or at the injector. Usually nothing but a compression fitting to loosen. Mine...

Fuel is new and clean and I have a filter on the pump from the storage tank. I only had the first tractor for several days before the problem surfaced. That was when I traded it for the 3940.

Hello all, I have a 2013 L3940 with 60 hours. For the past several times I have cranked it the starter has to turn it over several times(5 or 6)for it to crank, unlike when it was new and started on the first turn. Once it had a little trouble picking up like it was out of fuel. It runs good...