Recent content by Cullinanp

problem solved - the coupler to the backhoe line was bad and descending. Odd thing is it hasn’t been touched in a year or more since the last time I used the backhoe. But all is good after a new couple was installed.

Hi I replaced both the transmission filter and the hydraulic filter as well as the super UDT - no change in condition. The loader was not on when this originally occurred - what i have discovered is the loader seems to respond some but not completely - and when the machine is shutoff and i go...

Hi - the linkages all appear to work properly. The bucket is not responding as normal. Thinking the filter - so I will change that first. It is time anyway to change the fluid and both filters. I will try the hydraulic filter first to see if that immediately fixes the issue - then change the...

The linkage rod is moving very easily - but the spring and opposite stop are never engaged.

I checked and the feedback lever appears "loose" but there doesn't appear to be anything broken. it appears like neither the spring or the stop are hitting when the lever is moved to the extreme positions - i am not sure if they should be or not? It also doesnt appear like the stop nuts or the...

I checked and the feedback lever appears "loose" but there doesn't appear to be anything broken. it appears like neither the spring or the stop are hitting when the lever is moved to the extreme positions - i am not sure if they should be or not? It also doesnt appear like the stop nuts or the...

I was out mowing and got in to a wet area and i have to go in to FWD. I also tried to raise the deck and it was barely moving. The valve knob is open and i verified that. I brought it in to the garage and the 3pt wont lift anymore. The fluid level appears adequate. I am currently at 1000...

Hi My B2920 has an intermittent hydraulic leak. Appears during snow plowing - seems to occur when the unit is warmed up from having operated for awhile, and appears to occur when backing after dumping load. Leaves a streak of fluid and then stops.seems to be coming from above the hydraulic...