Recent content by Creature Meadow

Indeed it has for me most often when I back off the trailer which is the only time I use it. Excellent thought even if not the problem.

I'm sure your method will work fine but I prefer to cut up and haul with my pallet forks. If you have forks this is an option. I try to keep my burn pile to about 10' around, trees longer stick out and it is a pain to round the pile up as it burns with trees sticking out of the pile and it is...

For killing grass/weeds etc. I use 41% gycophosphate mixed at 1.5 ounces to the gallon, the TSC brand is what I use. Takes about a week or little less to see results. I found it is key to only spray when things are growing and not during a dry spell when the grass/weeds are in a dormant state...

I agree, love my turtle hat!

My bush hog is cat 3 so my QH want work with it, so for the 3 or 4 times a year I use it I remove the QH. Maybe you can do likewise? Good luck jay

I am a fireman and here in NC all departments are required to test their fire hose annually just as we do. Hose that fails we either trash it or if near a end we can sometimes recouple. We do give to people that come by and request some farmers are the main ones that stop by. Stop by your...

You should have no problem, I use the process above better than once a month to remove my loader and have a tooth bar on mine. Many tasks I do the loader just gets in my way and I don't like it sticking out there, especially in my garden. You will be fine, my loader is removed on a cement pad...

In response to above, while my tractor is 4 years newer I have had to replace nothing that I didn't break myself. I do the typical maintenance that a new or older tractor would require and I use it. Should be at 500 hours soon so after nearly 320 hours and 8 years owned "NO" issues. If...

Back in 2014 I bought a 2012 L4600 with 176 hours on it for $17,500. Had loader, R4 tires, gear drive with a small repaired dent in the hood. It had been kept in a barn but needed some attention. I took 3 days to clean it up, service and my cover photo shows it shortly after. It was local to...

Bush hog-slot Land Plane-holes Disk-slot Row bedder-holes Subsoiler-slot Tater plow-holes As mentioned above, I use the holes when I don't want my implements to drift much side to side When I may contact something or I don't care then the slots are little for forgiving. For example when using...

I use them in my garden so I have 4 piles around the yard and farm I blow them into. After a good rain I go to each pile and rake them in the tractor bucket and carry them to the garden. I dump them out around the garden. In the spring when my cover crop of oats gets about a foot tall I run my...

My cousin has a MX5400 and uses it to unload round bales that are delivered to his farm on 18 wheelers with no ballast. I've suggested to him while his tractor does fine and it is flat ground sticking the box blade at least on the rear would make it more stable and easier on the front end. He...

Awesome my internet friend! The big squeezes are the best! My 6 year old little girl is my world, although I am her dad and have to enforce rules we are also buddies. Laying on a blanket in the yard, just staring at the sky can yield so many questions! We enjoy doing this, then a picnic...

I like the forum and visit it a couple of times a day. I like the oil discussions, mods, gardens, and especially like the what is cooking thread. I chose to rarely comment on threads about politics, I come here for the above mentioned and to gain knowledge about Kubota related equipment. It...

I am sorry for misleading you, mine is the QH15! For some reason I thought it was the 20 but I checked it over the weekend when using my land plane and saw I was wrong. I apologize for providing the wrong information. I'm still happy to help any with the bedder but cannot help regarding the...