claya1's latest activity

  • C
    claya1 replied to the thread BF400 loader broken part.
    Drill was offset enough at depth that there was too much wall thickness, to shear easily. Bigger hammer, banging from both ends was...
  • C
    claya1 replied to the thread BF400 loader broken part.
    Pipe wrench/vice grips on the remnant was a big fail. The bolts are VERY stuck. Drilling them out, from the bottom is the only option...
  • C
    I am adding a P-shaped turnaround at the end of our driveway. The turnaround is at the low point on our property, but re-connects at NOT...
  • C
    claya1 replied to the thread BF400 loader broken part.
    So, the 14mm bolts are secured to the large front rod with a 14mm nut welded to a flat bar then welded to the rod. I have drilled...
  • C
    Did a survey. Answer was: Correct 99% of the time. Sample size: One Margin of error: 0 Statistics don't lie.. hehe