Recent content by ChrisB6000

Hello all, I need help, I am at wits end. I have a B6200 with front end loader. About a year ago 3pt lift arms wouldn't lift anymore. Nothing. First checked filters all good, opened up lift cylinder and control valve assembly. After that I reassembled and low in behold the lift arms worked...

HI Nocash, Check this link to the service manual #3 and look at page 42. http://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/&file=B5100_B7100__service_manual_part3.pdf&AutoIndex=ab05e3e4618a07852fb732f2b964b0c6

Thinking about this more, it must be a stuck relief valve in the 3pt hitch, does such a valve exist, and is so where do I find it? Thank you, Chris

Very interested in this thread as well. I have tracked my issue down to the same location. Not to hijack but I too can confirm hydraulic cylinder is holding and good hydraulic pressure to the back. Issue is the lever moving won't make hyd. fluid flow to main lift cylinder change. My handle is...

K, I used TDH oil and never replaced the orings, they were in good shape and held fine. I have now traced the problem down to the controls that the lever adjusts for up and down. I can confirm the main lift cylinder is holding well and getting good flow. I opened the box where the raise/lower...

Thanks Paul , but the loader is working flawless it’s the 3pthitch that has no lift

Ok, so update. I got the filter back in nicely. Maybe will help others down the road, for sure remove the rear right tire to get a straight access to reinstall filter bolt,, and also loosen clamp(s) toward engine compartment on the suction hydraulic line, this will give you better ability to...

HI Dave, it is a 4WD. Yes the screen looks like that! I was able to source a tap of the right size and some thread files to clean up the filter threads. with the banjo fitting pulled out of the way i can thread the filter back in, yes, I figured I was there, but when trying to re-install with...

Hi all my unknown problem became a big problem. First off my 3pt hitch stopped lifting, slowly to start and then nothing. Damn. A quick search led me to check my suction filter. It was ok not plugged, but on the replacement, The banjo fitting was putting sideways pressure on the alignment and...

Chris, I took mine off the tractor and used a parts cleaner tank. Took a while of just flushing cleaner through it and smoe brushing to fully de-gunk it. A really good shot withthe air compresssor got rid of the rest. The clear bowl originally came with a fill line. I could still see mine but...

KU, I heading down the exact same road you are, one of discovery of a new (to me) B6000. I believe, the air filter works by making the air take a really sharp 180 degree turn. Particulates in the air can't make the turn and end up hitting the oil surface and sticking. The oil soaked screen...

Vic, PM on its way Thanks, Chris

Okay, I believe I found the correct NGK # which is Y107-1, but no I can't find any parts dealer around here that stocks them or can even order them in. Their books don't show a Y107-1 anymore. Vic, am I on the right trail? THanks, Chris.

Dusty, thank you for the reply. I have tested the glow plugs and they are shot. So I am some what planning for the winter. It has been giving me some troubles starting. I have gone through the diesel system and cleaned it all out with new filter and bled the system. I have had it running a...

Good Day, just recently picked up an older B6000 that is in need of some TLC. I need to replace the glow plugs and can find the Kubota part number easy enough 15231-65512. I need to know if anyone has the equivelant in a different brand that I could get from a local automotive parts retailer...