Recent content by Chris_

  1. C

    Downsizing Newb

    Nice machine, looks well taken care of. Those little BX really punch above their weight class. I'm in the opposite position as you, need to sell mine as I bought something a touch bigger for my 25 acres.. I used the BX for 3 years on that property and it did very well. I will miss the backhoe!!
  2. C

    Truck / trailer questions

    I pull that load with an F-150 every day. You don't need more truck
  3. C

    This is my 3pt ballast..............

    Holy crap! Solid - that's not going anywhere.
  4. C

    Decision Overload

    Unpopular opinion - You have just a couple of acres - you don't need anything very large. From your list the B would be more than enough and you could probably make do with a BX. You could easily find one of those with a BH for the price you are looking for and have money left over . BX really...
  5. C

    Tick Tube Time

    How many are you making, for how big a property?
  6. C

    General Lee's been hit!!!!!!! *******Updated with new Poll**********

    I voted with my conscience not because I think I know what you're going to do :D
  7. C

    Big Pop

    Sounds like a short or blown fuse
  8. C

    Thoughts on other makes and models

    Hope you didn't expect an unbiased opinion on a Kubota forum did you? :LOL:
  9. C

    New or Used?

    I've done used on both the tractors I've bought. Saved quite a bit, but I'm also very mechanically inclined to fix little issues. If you buy used you'll have to get used to the idea of fixing the odd thing to bring it up to standard. My first tractor had 600hrs on it, was always stored inside...
  10. C

    Greasing your machine....The hate/hate relationship.

    I just bought a tractor that was a mess that I had to clean up. If you looked at the thing you got grease all over you. On my old tractor I just used a paper towel, on the new(er) one I've found the brake cleaner does a great job cleaning it off. Is it true that brake cleaner is hard on paint...
  11. C

    Brand new implement rust and bent

    Take you all of a minute to bend it back and spray a touch of paint if you're worried about it
  12. C

    Cylinder pin and bushing spec/tolerance LA534 (B2650 tractor)

    Thanks guys I got a new pin and replaced the old (and cleaned off the grease) Old: https://www.youtube.com/shorts/tTMPMR0LbHg New: https://youtube.com/shorts/q240wliyG7I?si=wUK-EcZgmI3RbgNY Much better!! I will be greasing it up shortly but for now I'll admire its grease-free appearance :)
  13. C

    Cylinder pin and bushing spec/tolerance LA534 (B2650 tractor)

    I use this already more than I should!
  14. C

    Cylinder pin and bushing spec/tolerance LA534 (B2650 tractor)

    So I removed the other side (driver side) last night, and found it to be 25.4mm (1"). I cleaned up the first one and found it to be well worn, out of round in places. I think the other guy only used grease on the outside of his joints lol I'll replace the part and go from there. And I cleaned...
  15. C

    Cylinder pin and bushing spec/tolerance LA534 (B2650 tractor)

    Off to tell the wife i need a $1k lathe for a $25 part....... I"m sure she'll understand.
See more
Top Bottom