Recent content by chris attwell

generator not charging b7100.this is a simple alternator,a 2 wire. the wire goes in around the poles and comes out.measure the a/c voltage between the wires, must be 20 volts or more.if you have a resistance [ohm ] reading between one wire and earth there is a short, broken wire. blowing the...

the voltage a/c across the two wires is the most important thing to measure,I got only 3.5volts so ?? the resistance from each wire to earth, was 3.5 and 10 ohms. wolfman is correct you can bend a cheap 10mm ring spanner, and remove that hidden nut..getting it back on ?the alternator was Full...