CGMKCM's latest activity
-
CGMKCM replied to the thread Nomenclature.I think the 23 refers to metric horsepower as measured at the flywheel with no engine accessories. -
One of the fronts on my G2160 ruptured and I needed someone reliable to replace both of them. Called a local New Holland dealer to see...
-
Fauquier county VA. Asking $37,000. Well maintained, garage kept long box Super Duty. 98,500 miles. Emissions on. Needs nothing at all...
-
Long time reading from the shadows, new registered member.
-
Bradco 609, a nearly 10 ft backhoe with structure and hydraulics more comparable to what an M59 backhoe is like, is probably too much...
-
I picked up the trailer this morning and towed it about 500 miles to Sheridan, WY. I was able to do the brake "break in" as instructed...
-
CGMKCM reacted to McMXi's post in the thread In search of a better truck for towing the M6060 and folding cutter. with
Like.
The town where the company I work for is based has a scale at the grain elevator just a couple of blocks from main street and it's... -
Try to find a local class for farmers, hobbyist, DIY etc. A little hands on assistance really helps get started.
-
CGMKCM reacted to McMXi's post in the thread In search of a better truck for towing the M6060 and folding cutter. with Like.
I'm a little under half way through a 3,400 mile road trip with the F-450, and the three-day drive out here got me thinking about the...
-
CGMKCM replied to the thread Front ballast for L4760 when using Woods TKP84.40 mower.My 4760 came with front weight bracket built into the grill guard guard. IMO I think you will be okay without front weights, My 7ft...
-
CGMKCM reacted to Kennyd4110's post in the thread In search of a better truck for towing the M6060 and folding cutter. with Like.
The ORANGE clashes with the RED, it would look much better with a GREEN tractor :LOL: 😁 Just kidding of course, that's a beautiful...
-
CGMKCM reacted to McMXi's post in the thread In search of a better truck for towing the M6060 and folding cutter. with Like.
First time towing with the new truck today and what a difference 22 years makes! I wasn't happy with the positioning of the tractor and...
-
CGMKCM replied to the thread Overfilled engine oil on BX23.I would remove oil filter, drain then re-install. Run engine, check oil level, repeat if needed until correct oil level is reached.
-
Refer this table I made a long time ago - when the LX2610 used to be the B2650 (pretty much same tractor though)...
-
Going to "Wheels at Wanaka"