Recent content by Carleola

Hi WhiteTiger - thanks for your insight! This may be the problem...I'll test it. I will have to replace the MMM lift arm or forge it back into spec. I try keep all my attached implements level at all times, so I wonder why I messed up.

Hi Handlebar - I wanted to know, if you found the cause of your problem? I just purchased a new LX3310 with a mid-mount mower (MMM) and within 3-months I noticed that in lifting and lowering the MMM it has resulted in the LHS mower lift arm (K5772-61160) bending! It may have slightly bent the...

Hi Guys, thanks for your valued input. My research confirmed what y’all are saying. I was being curious if any one out there had any issues. Looks like that’s not the case!😁. I fixing to order one.

As has been well documented this forum, the B3350 had DPF regeneration issues. Apparently, these issues have been resolved in the LX3310. Can anyone with a LX3310, please confirm if this is actually the case?

Spent 5 hours grinding tree stumps with a Woodland Mills stump grinder on a B3550. A good day in Texas,

Spent 5 hours grinding tree stumps with a Woodland Mills stump grinder on a B3550. A good day in Texas,

Here is an update; I purchased the WoodMaxx WM-8H. I have about 50 hours on it and its attached to a Kubota B3350 (33HP and 27HP at PTO). The machine has worked flawlessly and the reverse hydraulics is worth the extra expense. It clears jams in a jiffy. My only concern is with my tractor. The...

@mdhughes - Yes, I was looking at the hydraulic machines only at this time. Are you happy with your 8M? Any issues?

I've been in the market for a homeowner/large (30 acres) acreage wood chipper. I have narrowed my choices down to two brands that I thought would fit my needs - they are the WoodMaxx and the Woodland Mills. I could not find any comparisons on them so I compiled what I think is an accurate...

wolfman - Thanks, good tips. $350 sounds much better than what dealer would charge and will give me something to do during winter and an excuse to get out the house! BAP - it seems switch is working, but will double check it. My son was using the rear PTO and was unaware he had not removed the...

On removing the belly-mower, the mid-PTO coupling and shaft was left coupled to the mid-PTO. On starting the tractor, the PTO coupling shaft proceeded to destroy the HST filter, which broke off the filter screw-on nipple. The skid pan was dented and the mid-PTO bearing might be damaged. Has...