Recent content by captmikem

Thanks for the inputs, I bought it. M

just pm me your email and I will send it. M

About to replace the belt on my RCK60B23BX Messicks wants $125.64 plus shipping for a new one. Amazon sells one for $28.30 with free shipping. I would normally pass on that but it has 131 reviews, all positive except for two. 78% give it 5 stars. Has anyone used this belt? D&D PowerDrive...

I broke the tailwheel on my plane with a hard landing in Kansas one time at a very small airport. Got a ride into the local hardware store and bought a wheelbarrow tire and wheel for about 20 bucks. worked fine and got me home Washington State. Works on a plane, ought to work on a brush hog. M

This is all within the same hour..

I use the dye, and it is... crazy. one day nothing in the sight glass, next day sight glass is full next day sight glass is half.. I never really know from day to day if I am under, over, or half.. when I have a hyd leak, (usually a fitting on my back hoe) I add a quart or so, run it for a...

Here, from the manual.

With the Tractor off, hold down the two orange square DPF buttons on the left side of the wheel while turning the ign switch 'on'. release the two buttons, you should have an 'a' in the display. Push the right DPF button once, you should have a 'b' in the display. Push and hold the right...

Might also check the Common Rail Sensor Connector worth a try. Note, I had to clear the codes after replacing the connector. Easy to clear the codes, let me know if you need to know the procedure . Good luck.

I was out working in the woods today, had the grapple on and was clearing brush. Tractor stopped running, little red engine light on the right side was illuminated throwing codes: P0627 - Fuel Pump 'A' Control Circuit/Open P0087 low fuel rail pressure P2293 no idea what this code is...

I have the BH77 you can move the mount for the seat back, there is another set of bolt holes for it. Still not a lot of room but better. M

Everything fits!

I have to say there is little my grapple will not handle, it is the most versatile attachment I have. And it is GREAT for clearing blackberry bushes which seem to take over here in the PNW. M

Wife's favorite is the triple, she loved flying it but when we moved to the PNW had to switch to the 78. She is with AAL. I think you are right on the indoctrination, work, but but good to get it apart and take care of a bunch of small items that would not happen otherwise. Good machine...