Recent content by capp

I'm waiting on a part called a dampener that sits under the Hst peddle the video seems to say it will help with stopping better. It might be here tomorrow. I'll let you all know how I get along as soon as I can.

To add to my reply, sometimes you can turn the key to start and then back to stop and you will hear a click sometimes I have to do this over and over to get it to start right, I think that is caused by the switch behind the right rear tire. I'm going out to the shop and work on this again as...

Thanks again for another video.

Thanks for all your help, I agree with you that there is no brake like thought there should be only the Hst. I will order a new shock tomorrow. I've already been looking for the bolt that every one is talking about. For the life of me, I can't find the bolt that everyone says is loose. I'm...

going to hit it a running in the morning

not yet

I have to buy one of those shut-off solenoids almost every year. I raised the hood and removed the screws to the bonnet. I slide it back so I could see the shout off solenoid. I then tied a piece of string to the part that cuts the motor off make sure the string is long enough to make it shut...

Sorry for not getting back to you sooner. I was wondering if you took any pictures of what you did. Did you have to take the floorboard off? If you did could you put them up on the board I'd like to see them? Thanks Capp

Hi, if I was was you I'd buy me a new filter and some new oil first, do you know how long you have used your tractor since it's been serviced? It will hold 2 and 1\2 gal.

I agree with Skeets

Take a leaf blower to it. Mine does the same thing.

That is a hair scratcher for sure. Something just isn't right I'd take the front off of it and then the head off. if the decompression does tell you any thing.

How much brake did your friend have when you started this project? I kinda figured what you said about the turnbuckles. I can do that, if need be I can get the torch out and heat them up a little. For some other reason, my HST is leaking oil badly. I've had my HST off the frame once before, so...

brake pedal goes down about 3/4 of the way. Today I went out and cleaned it off and put some paper under it to see where the leaks were so I can order seals. When I get this done I'm going to try and see if I can fix the brakes with the turnbuckles that go down the left and right frames. I'll...