Recent content by Cal270

3/21/2020 Regen@520 hours Took 16 minutes at 2200 rpm Plowed twice this winter Warmer and no heavy snow falls

PS. No ballast box now...was a real hassle. Had tires filled with RimGuard Can’t figure how to update equipment

Regenerated today, process was seamless and continued to use the tractor. 483 hours on the tractor now. 53 hours since last regeneration. Took 13 minutes. Had a major service back in March by my dealership, cost was $670. All fluids except engine oil and filter, that I can do... Including...

Thanks Sheepfarmer O ring could be it. My mechanical ability is oil changes and air filters... Tractor is running fine. My concern is can it effect the fuel injection system. That being can the air pass to and thru the fuel filter? Maybe a forum Kubota mechanic will offer advice...

I’m seeing a 1/4” of air in the fuel bowl when the engine has been running on this 2014 4060 hstc. The red ring is on the bottom of the bowl so not a water issue. Had this same issue in early fall and dealer tech came out and drained it and cleaned, said it wasn’t dirty. Tractor has 463hours...

Regenerated at 430 hours while rotary cutting. Took 15 minutes. 54 hours since last time. Engine sounds slightly rougher when going thru regen. No issues with tractor and do like the cab. Will have dealer do a full service by Fall. I have been changing engine oil.

Regeneration at 376 hours and it took 15 minutes. Was brush hogging and process was seamless. 49 hours since last regen.

If you do buy a landscape rake, gage wheels are advisable. With gage wheels it is much easier to run the rake and have a nice level grade. Think I paid approx $400 for a set of gage wheels and after using them a few times was worth the money.

Sounds like there is an issue with the regeneration. My average is 36 hours between regen. My working rpm is 2200 and if running pto is 2400. Seems like between 2000-2200 rpm is the power band. Push your dealer and go over them if needed. Good luck!

Regenerated at 326 hours. Took 12 minutes at 2300 rpm Mild winter in Mid-Michigan...only plowed 4 times...so sad...

7/23/2016 Regen at 279 hours. Took 12 minutes, just kept move and leveling stone. Fairly seamless. Had rpm's at 2250 when "working" and screen did not indicate an increase in rpm for regen. 48 hours since last regen... ***128526; ***128668;

Congrats! Great Tractor and I do love the Cab... Have had mine since mid-2014. 216 hours on it. Per dash average hourly fuel consumption is .6 gallons which is amazing. When using the tractor I keep rpms at 2200 or so. Keeps the regeneration frequency down and engine is in its power band...

Looks good! I have the same model and have been using a soft tool bag and leave on floor of cab. Not the best situation. What type of ammo box did you use. Looks fairly large. Dimensions? I have never used my left door to enter or exit. Though your setup would let door open.

Regenerated at 231 hours today. Took 14 minutes at 2300 rpm. Still can't believe how much quieter the hydrolics are since the major service at 213 hours. No longer have the annoying hydro whine... Very mild winter in mid-Michigan...not much snow plowing time this winter.

Tractor was just serviced by dealer. Included changing out HST fluids including front axle & filters. 210 hours on tractor. HST is much quieter! Seemed to quiet down the high pitch trans and FEL whine. Can still hear the trans and FEL working but much easier on the ears. Super UDT2 was...