Recent content by BX25Dave

  1. B

    Cooling Problems

    I totally agree, but there is no trace of coolant at all. When I overfilled the recovery bottle one time, the excess dripped all over the mower deck and I could smell coolant. I don't smell anything and there ios no trace of coolant on the deck. I'm still scratching my head over this one. Migh...
  2. B

    Cooling Problems

    I've got a laser temp gauge. I'll try it and see what it is. Thanks again!
  3. B

    Cooling Problems

    Thanks for thet, I'll check on Monday to see if they have one.
  4. B

    Cooling Problems

    The only thing that comes out is some smoke from startup, diesel smoke, then clears up and nothing else. Thanks!
  5. B

    Cooling Problems

    I agree, it is too much. I'm going to have it pressure/vacuum checked and see if I can find out what the issue is, I'm perplexed! Thanks
  6. B

    Cooling Problems

    When I was in the military we used to use simple green to clean the helicopters. But found out that simple green was a corrosive on aluminum. That was some time ago, I don't know if Simple Green has changed the formula, but I am wary of it. I do use a cleaner to get that layer of fine dirt found...
  7. B

    Cooling Problems

    The radiator screen and the radiator are cleaned each time i use it. The gaige runs about 3 dots in idle or just moving around. When an implement is engaged eith from the back or mid, it starts to heat up, slowly. About 1/2 hour later its in the high range and I shut it down. I have not have the...
  8. B

    Cooling Problems

    Thanks, I went out and checked all the red clamps, all tight and no signs of coolant around them. The odd thing is that I don't smell coolant and there are no signs of it coming out the overflow hose. Thanks
  9. B

    Cooling Problems

    Yep, I got one when they came out and replaced it. Thanks
  10. B

    Cooling Problems

    Pull out screen and radioator cleaned before and after each use. All clean there. The guage runs at about 3 dots when just driving. When as load is put on it either the brush hog or the under deck mower, the gage starts going up. It stays at 4 dots for a long (about 15 minutes) time, then moves...
  11. B

    Cooling Problems

    I hooked a little bottle to the overflow tube to see if coolant was coming out. none seen there and the funny thing is that I don't smell coolant. I'll find someone to do the pressure/vacuum checks, I don't have the equipment to do so, excellent suggestion, Thanks!
  12. B

    Cooling Problems

    Thanks for the info. The reservoir is 3/4 full when I start, but when it gets hot it is empty. I'll get a new radiator cap. The recall on the reservoir cap has been done, so that should not be an issue with that one.
  13. B

    Cooling Problems

    Thanks for the suggestion. did as you said, really nothing behind or under the battery, generally clean. Thanks!
  14. B

    Cooling Problems

    The radiator and screen are both clean. I check tose on a regular basis. I changed the thermostat several months ago (with an OEM one), still did not stop the overheating. The guage usually runs about 3 dots. Anytime I engage a implement (doesn't make any difference what it is) the gauge goes up...
  15. B

    Cooling Problems

    Hey Everyone, I have a 2015 BX25D. When I go to use it to mow etc., It is getting hot, with sometimes 2 dots above the normal 3 on the gage. This last time, I opened the radiator (I always check it before running) and it took about 1 1/2 quarts of coolant. There is no liquid in the oil and all...