Recent content by btrahan23

Well it’s been a week since I installed the Colby valves. They installed in less than a minute per tire with a 9/16” hand wrench. It took longer to fill them back up with air than to install them. I have been checking everyday and they are holding tight with no leaks what so ever. It sure beats...

Thanks guys, I decided to go ahead and order them and give them a shot. I will post once they come in and I install them.

Hi guys I have a slow leak around a valve stem on my L235. I started looking and found they have valve stem that can be replaced without breaking the bead of the tire. It seem like it will be a lot easier and cheaper than bringing it to a tire shop any I can get "4" for $20. I was wondering has...

Perfect that is exactly what I needed. Thanks 85Hokie & wgator

Hi guys does anyone know where I can find the plate that tell me what gear I’m in on a L235. I bought the tractor and I’m unable to make out the gear numbers being that they are faded beyond recognition. I looked on eBay and several tractor part websites with no luck. If anything can some one...

Thanks Roadworthy

After it warms up it’s around 50 psi.

Hi guy I was wondering what is the operating oil pressure on a L235 is? The gauge when I bought the tractor was broken, when we got her running I changed out the gauge and it shows 60 psi when I first crank it up. Thanks.

Thanks Russell King you was spot on with the linkage and adjustment. She runs like a Top now!!

Thanks I will check to see if I can find the linkage.

Hi I purchased a L235 that has been sitting up for a while. We got her running but the clutch sometimes doesn’t disengage all the way when the petal is fully pressed. Every now and then it will disengage all the way but it’s not consistent. I was wondering if there is anyway to adjust the clutch...

Looks good Wetlander!!!;)