Recent content by BStevens

What is the tph valve and can it stick?

That hose is where it initially sprung the leak, at the block

Curious about the function of the line that goes from block to rear pb

Here is the current hose schem. I want to replace both controls, will this config work with new controls? Do i get the same for front and rear ?

Thanks! 1 or 2 spool?

Is this rebuildable?

I do have and study the owners manual and service manual, the problem is that nowhere can i find a clear hydraulics schematic for the two control valves. I replaced the hoses one at a time, thought i was ok. I'll keep asking with specifics, if you dont mind.

I used tractor hydraulic fluid, napa gold hydraulic filter, same as i took off. There is always a chance imay have misplaced hoses. I Let it run a while and moved controls to work out air. I cracked a couple of the fittings on the pistons not functioning to check for vapor lock but fluid was...

Im totally new to tractors/hydraulics so please bear with my ignorance. I bought an old B7100, it ran fine for a while. Got hydraulic leak at block so decided to change some hoses, filter and fluid. Now the bucket barely lifts and wont tilt and leaks from left piston/ram. Also the rear scraper...