Recent content by Bountyhunter

I've been studying up on the Fenner Drive and that really sounds intreging. I'm going to look into this more.. I'm collecting parts right now but I use the tractor so much, that I'm afraid that there will be snow on the ground before I actually install all this H

I love the idea of a shrink disc. I've been looking at the pictures. Is there a thread on how it was built? H

I was thinking of hooking it up to the main pump but not sure how to plumb it I have built the block to route the hyd through the loader control valve and then to the three point. The loader control valve is in series with the 3pt. Could I just hook to the power beyond port. I know just enough...

I have the opportunity to get a complete power steering unit from an Arens GT20 Garden tractor. It is fully hydraulic with an orbit valve on the end of the steering shaft. Is this heavy enough for a B6100 with a front end loader. i have a feeling that I may have to rig up a belt driven power...

Thank you for your replies. Is Kubota the best place for parts? I live in Canada H

I'm wondering if my hydraulic pump is getting weak. I have to rev it up to raise the 3 point with a200lb ballast box on the back and I noticed that it I kept the revs up the 3pt would stay up but start dropping as soon as the engine slowed down. It does this with the rototiller as well. Are...

I have a B6100 3 cyl diesel that the generator has not been charging for years. I think a bearing has now piled up as there is a real screeching noise when running and the fan is very hard to turn with the belt off. Where is the best place to find a used generator in western Canada. I imagine a...

Bunch of them just sold at a local auction for around 4000 + -. Mini skid steers went for around 5 Cdn

Just a thought. If you put a piece of angle iron across the top of the QA, it would make the top square instead of tapered. The top of the forks could then be made square to match it. It would take the "ramp" effect out of the top of the forks. If you don't like the angle iron, a piece of round...

We have a large garden but mostly raised beds. I have a B6100 with a home built loader. Use it almost every day. Came with a rototiller with a home built bed shaper that gets used once a year to till the garlic beds. Wouldn't want to imagine life without my Kubota

Cool. Can you open the hood with the loader down?

The pto on my B6100 stops turning whenever I push in the clutch. That would be a major PIA when operating a loader

I mounted mine on a pivot and used the rod attached to the 3pt to raise the whole assy. I think the rod may have been used for a mid mount mower and it moved when you raised or lowered the 3pt

I have a B6100 with a 6' 3pt blade and it throws the tractor around pretty good in snow H

Farmers in general do not have a lot of say as to how much they sell their product for. They can look at the price they are offered and decide to sell or not H