BottomlessBucket's latest activity
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.I used an Easy Glider to pull the mulch off the trailer so that was under the mulch requiring to be careful not to catch and rip up the...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.When we started this project a sheet of 10X5 aluminum was $325 and due to the commodities inflation brought in by our POTUS, that same...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.The fact is, when we first started this project, a 10x5 sheet of aluminum was $325 and then due to The Biden Inflation that same sheet...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.You likely didn’t see that I had used an Easy Glider under the load of mulch that allows me to pull the mulch off my trailer and onto...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.Clearly you haven’t worked much with mulch. It doesn’t resist the bucket like dirt and stay in place. It moves around on the driveway...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.Swapping out the Steel Bucket with the Bottomless bucket only took 35 seconds: https://youtube.com/clip/UgkxS-baH63wl2H7GL-9Aeeibl3E_zwB1Mgz
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.Did you watch the video? I didn't touch a shovel to fill The Bottomless Bucket. My point was that if you use your steel bucket to...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.Those are cool buckets but even the lightest weight skeleton buckets weighs in and over 200 LBS and you’re not going to get a full yard...
-
BBottomlessBucket replied to the thread Mulching with The Bottomless Bucket.If you watched the video you could see many scoops were half full or less. If I’m using just my steel bucket and wanted to fill it to...
-
BWell it's that time of year and we're laying down yards and yards of mulch. We used to use the trusty wheel barrow before we got our BX...
-
BBottomlessBucket replied to the thread Made myself a pallet fork attachment.Those are beautiful, and for sure, their low weight is what really differentiates them in the market. We'd be interested in reselling...
-
BBottomlessBucket replied to the thread The "Go Anywhere Workbench".Thanks for the great feedback. This is exactly the kind of feedback we're looking for and we'll certainly make some mods as per your...
-
BBottomlessBucket replied to the thread The "Go Anywhere Workbench".Thanks for your feedback. We thought of putting pallet fork sleeves on the bottom of the bench , but then re-considered doing so...
-
BBottomlessBucket replied to the thread The "Go Anywhere Workbench".Thanks for your feedback. If you look carefully there is, in fact, a 1 1/2" lip that goes around the entire bottom tray. My burn pit...
-
BBottomlessBucket replied to the thread The "Go Anywhere Workbench".My question precisely. There is a 1 1/2" lip around the lower tray that maybe isn't apparent from the one picture posted here. The...
-
