Recent content by BobReed12

Thanks for the info guys. At the plant I work at there is a pressure rated code certified welders and one of them said he would look at it in person, but thought welding it would not be an issue as long as he could file out the crack and such. (He welds all types of metals all the time. ex...

Oh an to answer your question hodge it is leaking from the bottom of the vertical crack located towards the left side of the photo.

Thanks for the information guys. Kubota has quoted me $211 for the part and needs time to figure up the labor cost which will be very high I fear due to what will be required to replace this part. I plan to keep the tractor for a long time so I want to fix it right, but also may not have the...

I tried to attach photos hope it works and helps. The close up one you can see where it hit and slid to the left of the photo once it hit the raise part of the housing it cracked it.

I was wondering if anyone had any advice on my required repair? I have a 2001 B7500HSD and while bush hogging the retainer pin came out from my lower 3 point hitch arm (right side from drivers seat) slid off the shaft and crashed into my rear axle housing. Sadly I seen this seconds after...

I am not sure if this is the information you need, but here is what my manual has listed for my RCK60-24B deck that I have on my B7500 Tires / Front link / Lift Rod Other / 19.9 in / 24.4 (7-12 /...

Thanks for the reply. I reviewed my manual again per your suggestion Rusty and I believe everything may be working as designed. It looks like maybe the prior owner moved the restricting plate to the side allowing for the 960 on the rear? I wonder if I slide this back over if it will still...

Hello I have searched for this and can not find any information in my manuals nor on the forums so I figured I would make my first post. I have a 2001 B7500 and when I engage the MMM PTO the rear PTO also engages is it supposed to? The picture on the side shifter shows that only the MMM PTO...