bobaloo22's latest activity
-
BHere ‘tis!
-
Bbobaloo22 reacted to Bee-Positive's post in the thread Kubota B2320 2010 model hydraulic fluid change with
Like.
Page 67 of the Ops Manual found HERE. While you're there download the Workshop Manual (WSM). -
BNothing in either the engine or transmission filters, both pretty clean. I cut them open on the band saw. Hopefully it's just a normal...
-
BAfter cleaning the zerk and prior to reinstalling, fill the opening with a good penetrant, pump the fitting and get as much pressure as...
-
BI would guess that there is a bad connection in the flow/pressure line between the tractor to FEL valve to Rear remote valve to three...
-
Bbobaloo22 reacted to MapleLeafFarmer's post in the thread L3940 Hydrostatic. Throttle pedal sticking with Like.
being a 15yo +/- tractor you may simply need to give it a little tlc. Grease gets old and stiff, springs get weak, etc... Sounds like...
-
BI switched to Rotella for the engine, but I “pay the man” and use the SUDT2 for the hydraulics.
-
BSee this parts diagram, there are a couple of parts underneath the cap to seal it and you may have lost them OR they are just leaky.
-
BIt’s what happens when filled to the top. (If you were to seal that cap up completely…. you may find that your engine will “stall”...
-
BI filled my tractor tank yesterday and while cutting grass fuel sloshed out around the cap constantoy. Did I lose a seal? Cap gone bad...
-
BThat's PN/ 13251-41060 Should be able to get one locally, do a search in OZ. If you can't come up with one, I might be able to find it...
-
Bbobaloo22 reacted to MapleLeafFarmer's post in the thread HST fluid, filter and oil filters? I searched but? with Like.
absolutely, let "newbies" or whomever discuss and those that don't want simply move on. Discussions are good... draws new people and...
-
Bbobaloo22 reacted to LBZ's post in the thread What did you do to or on your Kubota today? with Like.
Mowed for the first time this spring with the 2601. The neighbor has had cows next to me since December so as spring comes I get some...
-
BI had similar problem. My dealer told me to try this fix before going the seal route. He said the UDT/S-UDT used at the factory in the...