Recent content by Bob11x

Thank you for the reply. 1- From what I have read here, really the only place to return is T-ing into the soft line of the loader valve. Maybe I missed a better alternative. 3- No offense taken at all. I appreciate the fact that people care enough to share their knowledge!

Thank you for the replies. So the 3rd function valve is a non standard valve that can handle hi pressure. The valve I use for the rear remotes will have to have a PB sleeve to feed the BH AND a Tank line to send low pressure "used" oil back to the T I put in the loader tank line. Am I getting...

I needed to post the above before it disappeared on me. I tried once a couple days ago and it went poof! I thought I had a pretty good understanding of the hydraulics, but I would like to put on some rear remotes. I have read thru the B2650 posts and have some questions. I think I need to...

Okay - So I was able to get a used BH77 Installation kit from where I bought my tractor -another trade in that didn't have a BH but had the kit and the dealer allowed me to swap out parts. I Installed a Summit 3rd Function valve at the same time. Everything went well. I removed the BH hardline...

Looks like the spacers will require some mods. I will upload pics when done.

I am going to look at a B2650 with a 72" deck. I have a lot of hills and need at least 2 or 3" spacers. Is this possible? Looking at pics it seems like it would require some major mods to mower castors?? I have a BX25 now with 2" spacers and a 60" deck and it works like a dream.

Good thread - thanks for the link!

Any progress on the pictures of the install? I am getting a B2650 without a BH. It looks like there is a "Block Outlet Cover" that taps Hyd pressure for implements. Is that useable for a 2 spool valve? Don't mean to hijack, just would like to see the pics of the valve install (and the...

Haven't checked this site in a while - what happened to the WR Long posts??? I did install my Summit kit for the 3rd function and it is splendid. The only thing I could complain about is the hoses in the kit are not a good fit with the factory backhoe. The hose to the block under the right...

yes- it is wonderful to have so much knowledge collected on this site. I’ve put 5 hours on my tractor in the last 36 hours and love it. Ordered the summit 3rd function last night. I also have struggled with box blade and trying to manually adjust it ( on a bx - which I found I disliked the...

So sorry to hear that. Hope things are going ok. Thank you for your many knowledgeable posts.

Thank you. That was my understanding- nice to confirm it. Thanks for the link. Another project!

Thank you. I will give it a watch. Not one I found before. how do you like the bh on the 3301? And the 3301?? Leary of the regen but couldn’t pass up the deal.

That was part of my confusion- why is one T port ok for power beyond and another one needs a PB adapter. How is one supposed to know the difference?!? I am liking that valve location in your pic. Just trying to figure out how to control if I decide to use a BH thumb.., maybe add another electric...

Thank you all for the help and the pics! Just don’t want to muck it up. I’ll probably go with the 3rd function first and spend some time planning the rest. Any suggestions on an electric valve ? Ideas for switch mounting? Or just buy the kit as it’s pretty good deal??