Recent content by Bntlever

If I remember correctly, I had rear wheels lifted with floor jack, trandmission in neutral (not high or low range), front axle disengaged. PTO lever moved easily to all positions.

So, I put the PTO selector level in the mid PTO only position. This allows the rear PTO gear shaft to slide forward to the correct position. Refilled transmission with UDT2. See if there is any leakage overnight. Will get tractor up to normal operating temp tomorrow, check for leaks🤞

HST oil leaking from seam between the rear cover plate and the transmission case. Removed rear transmission cover plate (6 bolts). Cleaned cover, put new gasket sealer on cover. Trying to reinstall rear cover plate. The PTO gear shaft is sticking out approx. 1/4” too far. Keeps cover from...