Recent content by bluelight16

I am goimg to which from a multi purpose cheap grease to Lucas red N tacky on my loader and mower is there any problems mixing the two greases until I push out all the old grease, comments please Thanks.

Ok thanks

thanks to everyone for there suggestions, I decided to mix some 85w/140 gear oil with 10/30 motor oil, I turned the crank over a few trimes then gave it start pull and it started first pull and there is no knock sounds like it did when it was new, I don't know how long this will last but if I...

Ok thanks I will try heavy oil, the mower was cheap from HD and as the old saying goes you get what you paid for.

Yes we do have some ditch that we use this mower for, thanks for your reply.

My push lawn mower that I use for trimming where my Kubota won't go has an engine knock, would anyone know if I put in a heavy grade oil or an additive or both would help get me some running time on the this engine, it is a Powersmart 170cc any comments please .

i HAVE A BX 2370 AND AM LOOKING AT PURCHASING A WOODLAND MILLS wc46 4" WOOD CHIPPER ANYONE HAVE ANY COMMENTS ABOUT THIS CHIPPER AND WILL MY PTO HAVE THE REQUIRED RPM LOOKING AT 18RPM. THANKS

Thank you Thank you, I adjusted the axle pivot bolt ( did not have the right socket so had to torque by feel) checked the mount plate found 2 bolts loose, retighten them took tractor for test drive even put a load of stone in bucket, no more clunking so far, I guess problem solved Thanks again

I checked the u joints and drive shaft no play or anything it does not hinder the performance of the tractor

No.

I only use 4wd when I have a full load in bucket and I get bogged down on wet soil,

i have clunking sound when in fwd front end mostly when turning any comment s please Bx 2370