Recent content by BilgeHead

I have a 1630 FEL on a B7100. On the FEL control valve the center spring is sloppy so I have to push it to the center sometimes. Recently I discovered the 3 point lift quits if the control is off center a little. There's a spot where I can hear the engine change but the bucket doesn't curl...

I put in an orchard and an electric fence around it using steel post, The post were high enough to run an uncharged line at the top. I folded light weight black netting over the top wire and secured it with tie wraps. The deer see the netting above and choose to go under it, making contact...

will this work? https://portland.craigslist.org/clk/for/d/vancouver-2-kubota-b6000-rims-and-tires/7155449367.html

Great info. I'll swap lines and see if my FEL will drop faster -- it's slowed down to a crawl the last six months --- even with a few hundred pounds of weight in the bucket. Seems like the easiest thing to do to isolate between cylinders-controller <and> pump/screens etc. Anyone know if a...