Recent content by Big N

I have not had any luck with getting this going. I still have the tractor and it's been a good one. I'm tringy to build a shop right now so after I get the shop built I am going to try to revisit this project. These tractors may be small but they needed to have power steering from the factory...

Here's the cylinder I've been looking at but if anyone knows where I can find one the right size let me know

I am in need of any info I can get and it seems like there is very little info available on this. I have studied and read every inch of the old post on this forum where another member was able to locate a company that built a power steering kit for this tractor. Well it seems this company no...

I am in need of a good pinion shaft and the ring gear for the front axle on a B8200. If anyone has these or knows where to get them besides west Kentucky tractor please let me know. Thanks

Wolfman, Thank you for your help. I was sure I had the correct axle. Now to get my money back and find the right parts

This is what I was sent. The splines aren't even the same size as the ones on my drive shaft and it's just to short. I didn't have the pinion installed in the tube in the previous picture but that's how long the pinion needs to be for this tractor. I talked to the guy today and it seems like...

I'll take a picture of the part they sent me when I get home this evening. I did get the pinion and ring gear from them but it's all worthless to me since it won't fit my axle.

Hopefully this helps

I have a B8200 4wd and I had my pinion seal on the front axle start leaking well after tearing it apart I found the reason it was leaking was because the bearing were very loose so I went farther into and found that the teeth on the pinion were badly chipped so I started looking for a good used...

Vic, Thank you so much. My machinist should be thrilled! I just bought the tractor knowing it needed a clutch and I figured probably a few other things but I got such a good deal on it I couldn't turn it down. I'm sure I just need to order a service manual for myself so I can keep the tractor...

I am fixing to dive into splitting my tractor to replace the clutch and I am hoping someone has a service manual for this tractor because I would really like to know if there is a spec for resurfacing the flywheel. I think it would be best to have it resurfaced if I am going in there to...

I've got a B5100 with a mid-mount mower which is the B445 model. The deck was in pretty rough shape when I got it and I'm slowly getting it back in shape but I have run into a problem with discontinued parts. I am needing the parts for the belt tensioner now I have the pulley but I can't get the...

Thank you sir, I'll check the web a little more maybe I can turn up a set for cheaper than buying and modifying something. Thanks again

Hey guys, new guy here. I just bought this B5100 which needs a bit of work to get going. I'm currently rebuilding the b445 mower deck and the front pto setup but I'm also really needing to put some front tires on it as well. The dry rotted tires that are on it are 4.00-9 which I haven't really...

Hey JoBo that mower deck looks great I wish I had the time to do that with mine, but I am just trying to get mine going for now. I just bought my b5100e with the b445 deck which was missing several parts a few of which have been discontinued and that's why I am here. I am hoping you can help a...