Recent content by berrycw2

Had the filters cut open and they were full of a grey sludge material (maybe water?). This seemed to be a bit odd as the hydraulics were working fine prior to the dealer hydraulic change of fluids and filters. As mentioned before I ran it for 100 hours before they clogged completely. I didn't...

It is a cab with FEL, plus a BH92. We measured the pressure after the filter change and it was up to normal pressure.

Changed the filters, and the hydraulics better than ever. I don't know the maintenance history prior to buying this tractor. It had 2800 hours on it when I got it, and we put a few hundred hours on it since. So I don't know if it is now completely sorted out or not. We shall find out. Thanks...

Had the hydraulic fluid changed 100 hours ago on my M7040 (2011 model), 3100 hours. Used Kubota filters and fluid. The hydraulic pressure relief value by the rear remotes was adjusted to bring up the pressure a bit as it was noticed that the hydraulic flow seemed a bit weak. Have not done a lot...

That makes sense. I'll check that. Thanks

I have an M7040 with an M20 FEL (Quicke Q20 FEL). The bucket can easily be curled up by hand. Like there is nothing in the cylinders to stop compression. The curl functions without any issues, even with a full load of wet soil in the bucket. If you tilt the bucket a bit to back drag than the...