Recent content by Benza

Sure, I can describe what we've done so far a little more clearly. No loader on unit. Bearings we took out and replaced all looked OK - One or two had some audible noise to them when spun. He wanted them changed anyways. -Got unit from friend, drove it around and tried to figure what was...

Easiest solution: Get ahold of the dealer and have them hook it up to their computer system to find out what's going on. We've had more issues with F3990's and B3350's than any other unit with DPF regeneration. With the lights and horn going all at once, the tractor is more than likely in limp...

Sounds like a bearing issue, honestly. Seeing oil means that a seal has gone bad. In my experience, bad seals typically result from a bearing failing, and metal getting to where it shouldn't be - Tearing up the oil seal. You said the growl is coming from the front axle driveline; Is the noise...

This issue has plagued the BX2370's, BX2670's, and BX25's ever since they were built. The best solution I've found is to get black gasket maker (comes in a tube) and take a very light bead around the outside of the clear plastic on the warranty replacement instrument panel. Wipe away excess with...

Like scdeerslayer asked, does it shut down immediately, or does it stumble? You mentioned if you pump the pedal it will catch...does it stay running then? How long do you have to wait before the tractor starts again after it dies? I've had an L3901 come in with that same problem; Turned out the...

In this case of events, the dealer would be liable for the drain plug falling out like that. I work at a Kubota dealership as a technician and setup, and our inspection sheets include checking over everything. https://imgur.com/a/88P9s This is the form for the L-series tractors. You'll notice...

Hey there folks, long time lurker, first time poster. Having a bit of a headache with a B2410HSD 4WD that a friend wanted me to look into. He brought it to me saying that it would howl in high, full throttle, going down the road. Won't make the noise in low, or anything below full forward. Has...