Recent content by belah

Doesn't anyone have any advice?? Do you think I even need to adjust the governor or could I try some thig else.C'mon guys, someone here must know a trick I can use!!

Thanks Robert, i'll try the arm&hammer and let you know how it worked!! Sincerely belah

Does anyone know how to adjust the Governor(or if it can be adjusted) on a 1992 model M4030su. I am turning a Winco PTO Generator and when my home ac unit tries to start, the tractor engine boggs down. It is a 49 hp tractor.Winco said that I needed 2 engine hp per kW so the 25 kW generator...

I need to flush the radiator on my Kubota M4030su. What would you recommend to remove rust and other gunk??? I have heard that Prestone makes a good radiator flush. I have also heard that Cascade dishwashing detergent was great (but I don't know if it will remove rust). Also, do I need to "back...

I need to flush the radiator on my Kubota M4030su. What would you recommend to remove rust and other gunk??? I have heard that Prestone makes a good radiator flush. I have also heard that Cascade dishwashing detergent was great (but I don't know if it will remove rust). Also, do I need to back...

I am cutting about 60 acres of which 40 acres are pasture and 20 acres timberland with underbrush. After more research I think the Woods BB 720 6 ft cutter would probably do just fine. It's a little heavier duty than the BB 72 model and has a higher rated gear box hp(130) and replaceable side...

I have a 1992 model Kubota M4030su with about 900 hours on it and am looking at a Woods Rotary cutter (bush hog) three point hitch type. My tractor has 49 hp. I was trying to decide between a 6' which weighs 800# or a 7' which weighs 1025#. I will be cutting pasture land mostly with the...

Thank You for all of the replies. I think that i've got it now. The engine runs at 2200 RPM to get 540 PTO RPM.

I have a 1993 Kubota M4030su 2 wheel drive with a 540 PTO. What "ENGINE RPM" do I need to run the PTO at 540?? I will be operating a 25 kW Winco PTO Generator which calls for 540 PTO RPM. Thanks Belah