Bearcatrp's latest activity

  • B
    Bearcatrp replied to the thread Snow blower question.
    Here it is. Just scroll down. $499 now. https://www.orangetractortalks.com/forums/threads/looking-for-a-cab-for-my-bx-2230.56018/...
  • B
    Bearcatrp replied to the thread Snow blower question.
    Search the threads. Someone posted I believe it was a huskvarna snow cab was a good fit. Didn’t cost much either. If I find it, will...
  • B
    Bearcatrp reacted to hetzer's post in the thread Front tires for 2019 bx1880 with Like Like.
    Yes, dealer found out that the tires and rims can only be bought together. Thankyou
  • B
    Bearcatrp replied to the thread BX ROPS question.
    Mine are pinned at about 40 degrees. Still about 6 inches above my head. But would like to have them up all the time.
  • B
    Bearcatrp replied to the thread Snow blower question.
    I had the largest cub cadet snow blower with all the bells and whistles. It did good but my old arse was getting to tired. Plus it was...
  • B
    Bearcatrp replied to the thread Front tires for 2019 bx1880.
    Get it figured out?
  • B
    Bearcatrp replied to the thread Snow blower question.
    Put a 6 foot blade on your 3 point, turn it backwards, then adjust the top link until it’s about straight up n down. Has worked great...
  • B
    Bearcatrp reacted to AOW162435's post in the thread Bx to B01 or lx2620 with Like Like.
    I purchased a new LX2620 in the Spring. It's done everything I've needed of it - no complaints. The meter now reads 40 hours. I...
  • B
    Bearcatrp replied to the thread Snow blower question.
    If I can find a real good deal on a 3 point snow blower, may get one for that one in every 5 years 5 foot blast.
  • B
    Bearcatrp replied to the thread BX ROPS question.
    Still a little bit above my head. Better than no ROPS. I never use the seat belt so prefer to bail if needed.
  • B
    Bearcatrp replied to the thread BX ROPS question.
    One of the reasons I don’t want to damage/modify the ROPS.
  • B
    Bearcatrp replied to the thread B01 for me?.
    A B will be under powered for moving downed trees. Pay attention to max lift capacity. My BX max lift is 680 lbs or close to that. I...
  • B
    Bearcatrp replied to the thread oil change?.
    Ah crap. So blowing in the valve stem is not a good idea? :eek:
  • B
    Bearcatrp replied to the thread BX ROPS question.
    Interesting. Can you post a picture?
  • B
    Bearcatrp replied to the thread BX ROPS question.
    i currently have my ROPS pinned at about a 40 degree angle and leave it that way. If I can get that top part about 4 inches shorter, can...
Show older items
Top Bottom