Recent content by bburnet2

The main control does move the valve when I try to raise or lower. The bottom/feedback bracket moves freely on the valve shaft I think. The bracket is held on the shaft by an e clip but the shaft looks square from my point of view. But, everything I can find says the shaft is keyed or pinned...

At setting 0-6 it stays on the ground and raises all the way when it hits 7 I have the feedback adjusted where it stops right before the relief opens

It does reach the upper position but once I come off the upper position it drops immediately. No control or reaction until I hit 7 on the indicator. I would call it no fine control between 0 and 7 on the indicator.

I have a B2301 that just started having issues with the 3pt raising and lowering. It only raises when it hits 7 on the height indicator and lowers all the way when it just passes 7 on the linkage. I adjusted the linkage with no luck. It looks like the shaft coming out of the valve is square...