Recent content by barmstro

Flogler I will let you know how it is, I would guess you need to practice retirement, just like first time you do anything. Worry not 5 years will zip by!!!!

The 7 foot blade is a left over from my B2650, I used it for snow no problem. I have not used it yet on the BX, I hope it isn't toooo big for snow removal. BARMSTRO

Thanks every one!!! I am excited. Madmax31, it can sneak up on you, you will get'r done. Barmstro

Wow the world just goes round and round. I started my Kubota addiction with the BX1860. I worked her for 1100 hrs and loved every minute of it. Then I made the mistake of sitting in a B2650 HST with cab, I had to have it. I have enjoyed my B2650 especially on hot days mowing and cold days...

HI all I have R4's and a 72" mmm on my cabbed b2650, no problems, I also decided this year to add 2" spacers each side. Still no problems. enjoy!!

I do not know, but I thought wheel spacers were a no go with the 60"MMM I do know they work fine on my B2650 with the 72"MMM I am happy with the added stability on hillsides. Loaded rear tires also,,,,, Is it a combination of the 2" spacers and me more accustomed to the Tractor? Perhaps, I am...

B2650 with cab and 2" spacers on each side. I run the 72"mmm When the deck is up it slides back and the "deck wheel" will bump the r4 once in awhile. after 158hrs no marks on the r4 from being bumped. When the deck goes down it slides forward allowing clearance no issue so far? My dealer...

No, I rented a 5' disc for my b2650, just last weekend. I had to replant about 1 acre of grass. I broke it up with my rippers on my box blade, I then chopped it up with the disc. I was working up and down slopes I would not have normally driven sideways, but with a ground engaging implement...

My A/C pushes very cold air, no problem keeping things cool. I do keep the vent cleaned. Hmm hopefully your dealer will get to the problem, and the fix.

Just to add info: I have a b2650 cab, The dealer put on 2" spacers for each wheel. I run a 72" mmm which mows wonderfully. It mows better than my bx1860, perhaps the extra gear better suits my lawn. I cut at 2500rpm in M gear. I have r4 tires. Enjoy your b2650

HI I went from a bx1860 mmm mower to a cabbed b2650, i hung a 72" mmm under the belly, the mower is very heavy duty, It cuts better than my mmm on my BX1860, I have what some would consider a lumpy yard. I hope you enjoy the B2650 I did add 2" wheel spacers for stability.

Hi All I am wondering if you could lower the center of gravity on the b2650/w/cab. I already have 2" spacers and filled tires. Could I put on a smaller diameter tire? I have r4s. Anyone know if their is anything out there that would fit the rim? I do not need the clearance for my property but...

very hefty, I could not imagine hooking up the tires well enough to do any damage at all.

Just finished putting my rebuilt tranny in old red 2002 f 150 I may have even done it right, it moves again!!! Getting toooo old or tranny are getting heavier?

I have a B2650 with cab and 72" mmm along with other goodies. I traded my bx1860 mostly to get the comfort of ac and heat. I added 2" spacers for each side, have fluid filled tires. I can say the BX1860 was more stable on hills. I only have 80hrs on the B2650 almost all snow blowing with front...