Recent content by backyardmachanic

wolfman sorry for so many posts ..i am not very good with computers ..i have never taken the pump apart..i only unscrewed the fuel outlets ..i saw a spring a copper washer and a tip ..did not go any farther then that..nothing was stuck so i put it back just the way it came apart..when i screwed...

wolfman the engine is a 3 cyl. with all 3 of the bolts closed no fuel comes out of any of the bolts ..if you crack each one then fuel will start to come out ..the more you open them the more fuel comes out...facing the water pump fan the pump is on my left ..is the front bolt no# 1..if so hat...

wolfman...i did bleed injector lines ..but i also took the bolts off to see if any thing was stuck nothing was...so i put it back together...did not know at the time those controlled the amount of fuel ...motor has not run yet..my question is what are the proper settings for these bolts..or...

I have a 3 cyl.D950 kubuto motor..it has sat for over a year..It ran great prior to it setting...It would not start so i started with the basics .. I pulled the injectors and they were bound and dirty ..so i sent them off to a rebuild shop to insure injectors are good...I took the injector lines...