Recent content by b454rat

Then why is just THIS SITE?!?! I go on many sites and not one has as many as this site does....

Its actually nice out today, so I'll try n grab some

I had it hooked up same way the PO had it hooked up and didn't lift it. I had it hooked up the same way the single was, and still didnt' lift it. I'll see if I can get a pressure gauge and go from there. It might be easier to post pics off my phone (which is really only way) cause this site has...

The way this site is not sure I can even post pics, but I will try. My 6100 doesn't have that block. My 7100 does, but not this. The single stage had the hoses go to/from under the seat to the control valve next to the throttle. The 2-stage has the hoses go right to the valve or whatever it's...

True, just need a pressure gauge.....

only thing I can think of is the pump is getting weak. The blower came off a 6100, so see no issues why it wouldn't work. But, I had to go to harbor freight, so got the cheapest (smallest) winch they had, hooked it up and lifts it pretty good. I already powered the PTO and it works. Now I kinda...

It's possible, but really can't see how since it came off and went on same way as the single stage, only thing that changed is the snow blower and hydraulic cylinder.

I'll try to get a pic. But for some reason this site makes my laptop stupidly slow, plus pics are on my phone. But i plumbed the hydro's same way as it was on the single stage. I can't plumb other way cause need adaptors for the lines...

I bought a 2-stage snow blower (think it's a B222, no ID tag) and when it's all hooked up, the hydraulics won't lift it. Granted it's a heavy SOB, but one I had the singe stage it would do it no problem. With the single stage it had 1 lever control valve, and when bought the 2-stage PO lifted it...

Miller Tire has the blanks and center discs. Pretty sure they have 12x5 or whatever stock is...

i have the 5 port. Read somewhere that it can be T'd with the return line.....

JD 318 valve and cylinder. The cylinder gonna be too short, but just want to get in and working, then swap it out once I find one.

I think i found a shaft, even comes with snow blower lol. Next problem (more of a question) is what pump do I need? JD won't tell you a thing, so don't what size to get. .50 CI, bigger smaller, don't want it too fast, but don't want snail steering either. Searches have most using a p/s pump or...

I used water in my old W/H up to couple years ago. Now they are being used again for the rims I made for my mini truck. Works just fine.

So just use the 3 bolts to hold it, not the splines. There isn't gonna be alot of twist force or whatever want to call it....