Recent content by B leever

Thanks, That's what I was thinking and why I asked. Like I said these are bolt on weights and I don't want to fool with them if I don't nee to. The backhoe won't be on all the time and I prefer the rear wheels filled for the loader and general overall increased stability.

I'm (finally) putting the Woods BH75 on my B2910. The mounting kit comes with four bolt on weights for the front end and the instructions say to get at least 20 percent weight on the front end. The rear wheels are filled 75 percent full. I have a loader which is usually on the tractor. I don't...

Thanks Wolfman, I did exactly that. It wasn't terrible. The answer is it "feels" like there's no play because you don't really feel the pressure release. There are steel friction disks and 3 brake disks in there with a pressure plate (like a motorcycle clutch). When you apply the brakes the...

My B2910 has had poor braking and way too much play in the pedal since I bought it (1000hrs on the clock) . I got into it the other day, removed the wheels and brake rod. The lever on the rear end goes almost full travel and then grabs near the end of the travel arc. I've never fooled with the...

Sent you a PM

Did you ever find your subframe?

Thanks to you both. I'll continue my search.

I'm wondering what the difference is between a B3030 frame and my B2910 frame? I have access to a 4 pt backhoe subframe for a B3030 and If it's as simple as drilling a hole where one isn't or grinding a tab to count it on my B2910 I'd be inclined to go for it. Anyone have any insight? Thanks

Hello Grayducks, I just saw your post. I haven't been here in awhile. Do you still have the backhoe and mount? Sent you a PM

Thank you all. I'm probably going to bite the bullet and buy one new from woods at this point. They still make them with a 30 day lead time. Not cheap though, $2200 or so.

Hello, I'm looking for the following: 1012619 4-POINT SUB-FRAME MOUNTING KIT for Backhoe Models BH70-X/BH75, BH80-X on Kubota® Tractors B2710, B2910, B7800 I'm new to the message board world. Also sent in a PM before I realized this is how it's done. I also read through this entire thread. It's...

Thank you! Will check it out!

Thanks, the only shot you're sure to miss is the one you don't take!

Wanted: 1012619 4-POINT SUB-FRAME MOUNTING KIT for Backhoe Models BH70-X/BH75, BH80-X on Kubota® Tractors B2710, B2910, B7800