ayak's latest activity
-
Thanks. Thats what the cryptic milkshake comment was about. I have not been allowed any food or drink by mouth since the surgery on... -
ayak reacted to Russell King's post in the thread ANybody else have one of these POS sthil 211's with
Like.
I have a similar saw. But the pull start system is probably what makes it hard to start, or the choke system. Both are new technology... -
ayak reacted to poseidon18's post in the thread Hooking up third function, rear remotes, and a backhoe line. with Like.
@TheOldHokie @ayak Ayak, your question provoked thought, while I don't have the bh77 but rather a bradco 609, I still went ahead and...
-
ayak replied to the thread Hooking up third function, rear remotes, and a backhoe line..Did the BH77 work ok prior to the project start? Also, you mentioned the BH77 couplers are now flat-faced. Any chance during that mod...
-
ayak replied to the thread Hooking up third function, rear remotes, and a backhoe line..Did it work in its most simple configuration? Add stuff in one by one and test functionality. Also keep in mind, the 3-point hitch...
-
-
ayak replied to the thread Hooking up third function, rear remotes, and a backhoe line..Depending on your size, you may end up feeling a little pinched sitting on the mounted backhoe seat while doing work, with the lower...
-
-
ayak replied to the thread Hooking up third function, rear remotes, and a backhoe line..OP— have a look at this thread: https://www.orangetractortalks.com/forums/threads/3rd-function-hydraulic-routing.61399/#post-604946
-
ayak reacted to TheOldHokie's post in the thread Hooking up third function, rear remotes, and a backhoe line. with Like.
Here is the outlet block on your tractor. Here is the proper plumbing with ports and flow paths labeled. Dan
-
ayak reacted to TheOldHokie's post in the thread Hooking up third function, rear remotes, and a backhoe line. with Like.
The backhoe goes last because it has no power beyond and you are overpressuring the tank port. Loader->3rd function->Rear...
-
ayak replied to the thread Daily Chuckle.
-
-
ayak replied to the thread Kubota L3301HST.Picked mine up new in 2018 and now has 1500 hours without any trouble. Common rail engine with DPF isn’t any issue unless you don’t run...
-
If I remember correctly they need a small amount of play and they do use nylon lock nuts to hopefully keep them in place
-
-
ayak replied to the thread Daily Chuckle.
-
